Disposable atomizer-6CC-3

Product Category:Atomized inhalation series

Product Introduction

Mouth pieces atomizer by cylinder joints, pipe, spray cans (drug cups), corrugated pipe, tee, mouth pieces; The mask atomizer consists of a gas cylinder connector, a catheter, a atomizing tank (drug cup), a transition connector, a cover body, an aluminum clip and an elastic band.
The product is used for atomization inhalation.

Instructions for use

1. Make sure to tear open the package and take out the atomizer within the validity period of sterilization;
2. Connect the atomizer and the gas source of the atomizer;
3. The mask is placed close to the patient's face and fixed with an elastic band. Adjust the aluminum clip so that the mask prevents drugs from entering the eyes;
4. Unscrew the atomizing cap, add the liquid according to the doctor's instructions, then put on the atomizing cap and tighten it to the right. Insert the atomizer into the mask and connect the air source with the connecting pipe;
5. When using oxygen as the gas source, please check whether the oxygen cylinder leaks, so as not to cause insufficient gas and bad atomization;
6. Open the air source, adjust the gas flow to 4L/min ~ 10L /min(flow according to the doctor's advice). When necessary, pat atomizer until the atomization;
7. The loading quantity shall not exceed the maximum capacity specified in the atomizing tank (drug cup) (see specification). When dosing, do not inject the liquid into the hole in the center of the atomizer;
8. Mouth pieces atomizer: the patient's lips close to bite the mouth;
9. If the patient needs to reuse the atomizer, let professional medical personnel conduct disinfection (do not high temperature disinfection).